Radiocommunications (Low Interference Potential Devices) Class Licence Variation 2000 (No. 1)

The AUSTRALIAN COMMUNICATIONS AUTHORITY makes this Licence Variation under section 134 of the Radiocommunications Act 1992.

Dated   16 November 2000

 

A.J SHAW                                                                                                                Chair

 

 

R HORTON                                                                                                           Deputy Chair

Australian Communications Authority

 

1 Name of Licence Variation

  This Licence Variation is the Radiocommunications (Low Interference Potential Devices) Class Licence Variation 2000 (No. 1).

2 Commencement

  This Licence Variation commences on gazettal.

3 Amendment of Radiocommunications (Low Interference Potential Devices) Class Licence 2000

  Schedule 1 amends the Radiocommunications (Low Interference Potential Devices) Class Licence 2000.

Schedule 1 Amendments

(section 3)

[1] Section 3, note

omit

(see paragraph 5 (1) (b) and Note 3 of this Class Licence).

insert

(see paragraph 4 (1) (b) and Note 3 after section 4 of this Class Licence).

[2] Section 3, note

omit

(see Note 4 of this Class Licence).

insert

(see Note 4 after section 4 of this Class Licence).

[3] After section 4

insert

5 Other conditions for handsets and cradles

 (1) Each of the following radiocommunications devices must comply with the Radiocommunications (Electromagnetic Radiation — Human Exposure) Standard 1999:

 (a) a handset, for a cellular mobile telephone service, that has a device compliance day on or after the date of commencement of the Radiocommunications (Low Interference Potential Devices) Class Licence Variation 2000 (No. 1) (the licence variation);

 (b) a handset, for a cordless telephone service, that has a device compliance day on or after the date of commencement of the licence variation;

 (c) a land station (cradle) that:

 (i) is used in a cordless telephone service; and

 (ii) has a device compliance day on or after the date of commencement of the licence variation.

 (2) In this section:

device compliance day means the most recent of the following days:

 (a) if the handset or cradle was manufactured in Australia — the day it was manufactured; or

 (b) if the handset or cradle was manufactured overseas and imported into Australia — the day it was imported; or

 (c) if the handset or cradle was altered or modified in a material respect — the day it was altered or modified. 

[4] Schedule 1, item 3

omit

7.5W

insert

7.5 W

[5] Schedule 1, after item 43

insert

 

44

Radio Local Area Network transmitters used indoors

5 150 – 5 350

200 mW

(averaged over the entire transmission burst)

1. If the emission bandwidth is 1 MHz or greater, the radiated power spectral density in any 1 MHz is limited to 10 mW per MHz.

2. If the emission bandwidth is less than 1 MHz, the radiated power spectral density in any 4 kHz is limited to 40 W per 4 kHz.

45

Radio Local Area Network transmitters

5 725 – 5 825

1 W

(averaged over the entire transmission burst)

1. If the emission bandwidth is 1 MHz or greater, the radiated power spectral density in any 1 MHz is limited to 50 mW per MHz.

2. If the emission bandwidth is less than 1 MHz, the radiated power spectral density in any 4 kHz is limited to 200 W per 4 kHz.