Fuel Standard (Biodiesel) Amendment Determination 2004 (No. 1)
I, IAN GORDON CAMPBELL, Minister for the Environment and Heritage, make this Determination under section 21 of the Fuel Quality Standards Act 2000.
Dated 21 November 2004
IAN CAMPBELL
Minister for the Environment and Heritage
Contents
1 Name of Determination
2 Commencement
3 Amendment of Fuel Standard (Biodiesel) Determination 2003
Schedule 1 Amendments commencing on gazettal
Schedule 2 Amendments commencing on 18 December 2004
This Determination is the Fuel Standard (Biodiesel) Amendment Determination 2004 (No. 1).
This Determination commences as follows:
(a) on the date of their notification in the Gazette — sections 1 to 3 and Schedule 1;
(b) on 18 December 2004 — Schedule 2.
3 Amendment of Fuel Standard (Biodiesel) Determination 2003
Schedules 1 and 2 amend the Fuel Standard (Biodiesel) Determination 2003.
Schedule 1 Amendments commencing on gazettal
(section 3)
[1] Section 3, after definition of biodiesel
insert
Energy Institute means the standards development organisation of that name.
[2] Subsection 4 (2), table, item 9, column 4
substitute
18 September 2005
[3] Subsection 5 (1), table, item 5, column 3
substitute
EN ISO 5165, ASTM D613, ASTM D6890 or IP 498/03
[4] Paragraph 5 (2) (b)
omit
number.
insert
number; and
[5] After paragraph 5 (2) (b)
insert
(c) IP, followed by a number, means the testing method developed by the Energy Institute under the code and number.
Schedule 2 Amendments commencing on 18 December 2004
(section 3)
[1] Subsection 4 (1), table, item 11
substitute
11 | Methanol | 0.20% (m/m) | 18 December 2004 |
[2] Subsection 4 (2), table, item 5
substitute
5 | Copper strip corrosion (3hrs @ 50C) | (a) if the biodiesel contains no more than 10 mg/kg of sulfur — Class 1 (max) (b) if paragraph (a) does not apply — No. 3 (max) | 18 December 2004 |
[3] Subsection 5 (1)
omit
method
insert
method, as in force on 18 December 2004,
[4] Subsection 5 (1), table, item 2, column 2
substitute
Methanol
[5] Subsection 5 (1), table, item 7, column 3
substitute
(a) for specification Class 1 (max) — EN ISO 2160 or ASTM D130
(b) for specification No. 3 (max) — ASTM D130