Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Bell Helicopter Textron Canada (BHTC) 222 Series Helicopters
AD Name AD Number
Retirement Lives - Fatigue Critical Components AD/BELL 222/1
Quick Disconnect Dual Controls AD/BELL 222/2 Amdt 1
Tail Boom - Inspection and Modification AD/BELL 222/3
Tail Rotor Servo Control Linkage AD/BELL 222/4
Ng Operating Speed Restrictions AD/BELL 222/5
Directional Hydraulic Actuator P/N 222-382-002-101 AD/BELL 222/6 Amdt 1
Fin Assembly Attachment AD/BELL 222/7
Emergency Flotation System and Squib Valve AD/BELL 222/8 Amdt 1
Engine Chip Detector Lights AD/BELL 222/9
Flapping Bearing AD/BELL 222/10 Amdt 1
Swashplate Pins AD/BELL 222/11
Swashplate Drive Link AD/BELL 222/12
Main Rotor Yoke - CANCELLED AD/BELL 222/13
Horizontal Stabiliser Assembly AD/BELL 222/14
Main Rotor Yoke AD/BELL 222/15
Tail Rotor Boost Cylinder Support Bracket AD/BELL 222/16
Drive Train Overheat Temperature Indicators AD/BELL 222/17
Tail Rotor Blades AD/BELL 222/18 Amdt 3
Retrofit of Engine Overspeed Controller AD/BELL 222/19
Main Rotor Grip and Flapping Bearing Assembly AD/BELL 222/20
Vertical Fin Attachment Bolt AD/BELL 222/21
Flapping Bearing-to-Yoke Attachment Bolts AD/BELL 222/22
Swashplate Rotating Ring Drive Pins - Torque Test AD/BELL 222/23
Main Rotor Hydraulic Actuator Support AD/BELL 222/24
Main Rotor Pendulum Weight Support AD/BELL 222/25
Main Rotor Grips and Pitch Horns AD/BELL 222/26
Memcor Truohm Magnetic Brake AD/BELL 222/27