Airworthiness Directives 2004
I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety
Authority, acting under subregulation 39.001 (1) of the Civil
Aviation Safety Regulations 1998:
(a) revoke the Airworthiness Directives mentioned in
Schedule 1; and
(b) make, as separate instruments, each Airworthiness
Directive mentioned in Schedule 1 and attached.
David Villiers
Delegate of the Civil Aviation Safety Authority
20 December 2004
Note: Each attached Airworthiness Directive is being re-made in exactly the
same form as appears in the latest published edition of the Directive.
Schedule 1 Revocation and Remaking of
Airworthiness Directives
Enstrom F-28 Series Helicopters
AD Name AD Number
Retirement Life - Critical Components AD/ENST 28/1 Amdt 5
Stabilizer Spar Attachment AD/ENST 28/2 Amdt 2
Cable Gauge/Circuit Protection Coordination - Modification AD/ENST 28/3
Main Rotor Spindle - Inspection and Retirement - CANCELLED AD/ENST 28/4 Amdt 1
Main Rotor Spindle - Inspection and Retirement - CANCELLED AD/ENST 28/5 Amdt 1
Pre-Certification Requirements - Modifications AD/ENST 28/6
Main Rotor Transmission Attachment Bolts - Inspection and Replacement AD/ENST 28/7 Amdt 1
Fuselage Structure - Inspection AD/ENST 28/8
Main Rotor Mast AD/ENST 28/9 Amdt 4
Tail Cone Attachment Bolts - Inspection and Replacement AD/ENST 28/10
Fuel Tank Vent - Modification AD/ENST 28/11
Tail Rotor Pitch Link Safety Washer - Replacement AD/ENST 28/12
Main Rotor Hub Retention Lock Washer - Replacement AD/ENST 28/13
Upper Swashplate Bearing - Inspection and Lubrication AD/ENST 28/14 Amdt 1
Tail Rotor Spindle and Drive Shaft - Inspection and Retirement AD/ENST 28/15 Amdt 2
Tail Rotor Pitch Link Retainer and Guide Bolt - Replacement AD/ENST 28/16
Wide Chord Tail Rotor Counterweights - Modification AD/ENST 28/17
Alternator Field Cable Protection - Modification AD/ENST 28/18
Fuel Strainer Drain Valve - Modification AD/ENST 28/19
Mixture Control System Maintenance Checks and Modification AD/ENST 28/20
Tail Rotor Blade Grip - Inspection and Modification AD/ENST 28/21
Main Rotor Transmission Mount Bolts - Inspection AD/ENST 28/22
RAJAY Turbocharger and Fuel Nozzle Vent Line - Modification AD/ENST 28/23
Main Rotor Retention Assembly - Inspection AD/ENST 28/24
Clutch Engagement Over Centre Lock Warning Light AD/ENST 28/25
Tail Rotor Drive Shaft Couplings AD/ENST 28/26 Amdt 2
Narrow Chord Tail Rotor Forged Grips - Inspection AD/ENST 28/27
Clutch Engagement Handle Guard AD/ENST 28/28
Rotor Head Hub AD/ENST 28/29
Tail Rotor Spindle AD/ENST 28/30 Amdt 2
Main Rotor Transmission Clutch Assembly AD/ENST 28/31
Tail Rotor Gearbox AD/ENST 28/32 Amdt 1
Tail Rotor Drive Flexible Couplings AD/ENST 28/33
Main Rotor Shaft AD/ENST 28/34
Inadvertent Trim Motor Operation AD/ENST 28/35
Lamiflex Bearings AD/ENST 28/36
Voltage Regulator AD/ENST 28/37
Main Rotor Hub Plates AD/ENST 28/38