Airworthiness Directives 2004

 I, DAVID ALAN VILLIERS, delegate of the Civil Aviation Safety

 Authority, acting under subregulation 39.001 (1) of the Civil

 Aviation Safety Regulations 1998:

 (a) revoke the Airworthiness Directives mentioned in

 Schedule 1; and

 (b) make, as separate instruments, each Airworthiness

 Directive mentioned in Schedule 1 and attached.

 

 

 David Villiers

 Delegate of the Civil Aviation Safety Authority

 

  20 December 2004

 Note:   Each attached Airworthiness Directive is being re-made in exactly the

 same form as appears in the latest published edition of the Directive.

 


 Schedule 1 Revocation and Remaking of

 Airworthiness Directives

 GAF N22 and N24 Series Aeroplanes

 AD Name AD Number

 CANCELLED AD/GAF-N22/1

 Retirement Lives - Fatigue Critical Components AD/GAF-N22/2 Amdt 3

 CANCELLED AD/GAF-N22/3

 Landing Gear Retraction System - Chain Replacement AD/GAF-N22/4

 Aileron Control System - Chain Replacement AD/GAF-N22/5

 Rudder and Stabiliser Trim Systems - Chain Replacement AD/GAF-N22/6

 Engine Oil Tank Replacement AD/GAF-N22/7

 CANCELLED AD/GAF-N22/8

 Fuel System Check Valves - Modification AD/GAF-N22/9

 Main Landing Gear - Inspection AD/GAF-N22/10

 Relocation of Pilot Seat Installations AD/GAF-N22/11 Amdt 1

 Rudder Control System - Inspection and Modification AD/GAF-N22/12 Amdt 1

 Fuel Crossfeed Selector Knob - Inspection and Replacement AD/GAF-N22/13 Amdt 1

 Engine Air Intake Fairing - Inspection AD/GAF-N22/14

 Engine Air Intake Fairing - Inspection and Rework AD/GAF-N22/15

 Horizontal Stabiliser Rivets - Inspection AD/GAF-N22/16 Amdt 1

 Horizontal Stabiliser Trim Tab System - Inspection and Modification AD/GAF-N22/17 Amdt 1

 Upper Engine Cowl Left Hand Stay - Removal AD/GAF-N22/18

 Rear Baggage Compartment, External Door - Placards AD/GAF-N22/19

 Hot Air Check Valve - Inspection and Modification AD/GAF-N22/20 Amdt 1

 Control Wheel Assembly Retaining Pin - Inspection AD/GAF-N22/21 Amdt 1

 Fuselage - Wing Centre Section Spar Support Bracket Attachment - Inspection AD/GAF-N22/22

 Rudder Pedal Guards - Modification AD/GAF-N22/23

 Audio System Modification AD/GAF-N22/24

 Air Intake Anti-Icing Valve - Inspection and Modification AD/GAF-N22/25

 Rudder Tab Mass Balance Hinge Pin - Inspection AD/GAF-N22/26

 Rudder Tab - Modification AD/GAF-N22/27

 Horizontal Stabiliser and Trim Tab System AD/GAF-N22/28 Amdt 4

 Horizontal Stabiliser - Weather Proofing AD/GAF-N22/29


 Horizontal Stabiliser Control System - Inspection for Wind Gust Damage AD/GAF-N22/30

 Control Wheel Gimbal Support Structure Tie Rod Attachment Plates -  AD/GAF-N22/31

 Trim Tab Hinge to Horizontal Stabiliser Attachment - Inspection AD/GAF-N22/32

 Rudder Structure and Trim Tab Control Rod - Inspection and Modification AD/GAF-N22/33

 Horizontal Stabiliser Gust Lock - Installation AD/GAF-N22/34

 Horizontal Stabiliser Trim Tab System - Modification AD/GAF-N22/35

 Horizontal Stabiliser - Modification AD/GAF-N22/36

 Rudder Control Torque Shaft Universal Joint - Inspection AD/GAF-N22/37

 Horizontal Stabiliser and Trim Tabs - Modification - CANCELLED AD/GAF-N22/38

 Horizontal Stabiliser Pivot Bracket Attachment - Inspection and Modification AD/GAF-N22/39 Amdt 1

 Fuel Tank Selector and Fuel Shut-Off Cables - Inspection AD/GAF-N22/40

 Emergency Exit Door Lock Mechanism - Inspection AD/GAF-N22/41

 Emergency Exit - External Label AD/GAF-N22/42

 Autopilot Aileron Servo Unit Bridle Cable Assembly P/N 1/N-45-1317 - Inspection AD/GAF-N22/43 Amdt 1

 Rudder Control Lever Shafts AD/GAF-N22/44 Amdt 2

 Revised Compliance Requirements for Embodiment of Nomad Service Bulletins  AD/GAF-N22/45

 Control Wheel Assembly - Inspection and Replacement AD/GAF-N22/46 Amdt 1

 Engine Air Intake Modification AD/GAF-N22/47

 Flap and Aileron Control Rod Fork Ends - Inspection AD/GAF-N22/48

 Emergency Exit - Modification AD/GAF-N22/49

 Fin Attachment Fittings AD/GAF-N22/50 Amdt 2

 Rudder Pedal Guard Plate AD/GAF-N22/51

 Stub Wing Upper Front Spar Cap AD/GAF-N22/52

 Taper Pins - Control Systems AD/GAF-N22/53

 D.C. Power - Generator Cable Termination AD/GAF-N22/54

 Rudder Pedal Guard Brush Seals AD/GAF-N22/55

 Rudder Pedal Pivot Arms AD/GAF-N22/56 Amdt 1

 Oxygen - Cabin Supply Pipe AD/GAF-N22/57

 Horizontal Stabiliser AD/GAF-N22/58 Amdt 5

 Engine Ground Running AD/GAF-N22/59 Amdt 1

 Horizontal Stabiliser Pivot Bearings and Brackets AD/GAF-N22/60

 Trim Tab Hinge AD/GAF-N22/61 Amdt 1

 Stub Fin AD/GAF-N22/62 Amdt 1

 Stub Fin Plate P/N 1D/N-12-57 AD/GAF-N22/63 Amdt 1

 Aileron Structure AD/GAF-N22/64

 Rear Fuselage Frame AD/GAF-N22/65 Amdt 3


 Stub Fin Ribs AD/GAF-N22/66 Amdt 2

 Flap Components - Retirement Lives AD/GAF-N22/67

 Horizontal Stabiliser - Main Spar and Upper Skin AD/GAF-N22/68

 Ailerons AD/GAF-N22/69 Amdt 4

 Wing Strut Upper End Fitting AD/GAF-N22/70 Amdt 2

 Landing Gear AD/GAF-N22/71

 Upper Fin Rear Attachment Points AD/GAF-N22/72

 Rudder Pedals Brake Push Rod AD/GAF-N22/73

 Left Wing Aft Wing Break Electrical Connector AD/GAF-N22/74 Amdt 1

 Horizontal Stabiliser Access Panel Intercostal Angles and Upper and Lower  AD/GAF-N22/75 Amdt 1