Vehicle Standard (Australian Design Rule 3/02 – Seats and Seat Anchorages) 2005 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  21 December 2006

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions

2. amendment of vehicle standard

Schedule 1

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 3/02 – Seats and Seat Anchorages) 2005 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 3/02 – Seats and Seat Anchorages) 2005.
      

Schedule 1

[1]               Insert new Clause 3.2.1 “Vehicles certified to ADR 3/03 or a later version need not comply with this rule”.