Vehicle Standard (Australian Design Rule 43/0143/01 – Vehicle Configuration and MarkingVehicle Configuration and Marking) 20062006 Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  20th March 2007

SIGNED

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

Schedule 1.............................................................

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 43/01 – Vehicle Configuration and Marking) 2006.

Schedule 1

[1]               Clause 43.3.0.2.2, add to the end of the clause “satisfy the requirements of Clause 43.3.0.1 above.”