Vehicle Standard (Australian Design Rule 43/0243/02 – Vehicle Configuration and DimensionsVehicle Configuration and Dimensions) 20062006 Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  20th March 2007

SIGNED

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

Schedule 1.............................................................

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 43/02 – Vehicle Configuration and Dimensions) 2006 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 43/02 – Vehicle Configuration and Dimensions) 2006.

Schedule 1

[1]               Clause 43.4.1.2.1, replace the text of this clause with “The ‘Total Length’ of a ‘Semi-trailer’ over which the maximum width of the vehicle may be attainable shall not exceed 12.5 metres.  Not used”

[2]               Clause 43.4.1.2.4, replace the text of this clause with “Every ‘Semi-trailer’ shall, when viewed in plan, be contained wholly within the envelope shown in Figure 1.  Not used.”