Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated 29th June 2007

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions.............................................3

2. amendment of vehicle standard.....................................3

Schedule 1............................................................4

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005 Amendment 2.
      2.                            This instrument may also be cited as Australian Design Rule — Definitions and Vehicle Categories Amendment 2.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Definitions and Vehicle Categories) 2005.

Schedule 1

[1]               Add the following, in alphabetical order, to 3.  DEFINITIONS

UNLADEN TRAILER MASS (UTM) - the mass transmitted to the ground by the ‘Axle’ or ‘Axles’ of the trailer when coupled to a drawing vehicle and in its normal unladen condition, and at which compliance with the appropriate Australian Design Rules has been or can be established.