LONGITUDINAL CENTERLINE OF VEHICLE

Vehicle Standard (Australian Design Rule 29/0029/00 – Side Door StrengthSide Door Strength) 20062006 Amendment 1

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

DATED 17th SEPT 2007

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. legislative provisions..............................................

2. amendment of vehicle standard......................................

schedule 1..............................................................

legislative provisions
1. Name of Legislative Instrument
  1. This instrument is the Vehicle Standard (Australian Design Rule 29/00 – Side Door StrengthSide Door Strength) 20062006 Amendment 1.
2. Commencement
  1. This instrument commences on the day after it is registered.
amendment of vehicle standard
1. The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 29/00 – Side Door StrengthSide Door Strength) 20062006.

schedule 1

[1] Replace the Applicability Table and footnotes under Clause C “APPLICABILITY” with;

Applicability Table

Vehicle Category	ADR Category Code	UNECE Category Code	Manufactured on or After	Acceptable Prior Rules
Moped 2 wheels	LA	L1	N/A
Moped 3 wheels	LB	L2	N/A
Motor cycle	LC	L3	N/A
Motor cycle and sidecar	LD	L4	N/A
Motor tricycle	LE	L5
	LEM		N/A
	LEP		1 July 1992	Nil
	LEG		N/A
Passenger car	MA	M1	1 July 1988	Nil
Forward-control passenger vehicle	MB	M1	1 July 1996	Nil
Off-road passenger vehicle	MC	M1	1 July 1997	Nil
Light omnibus	MD	M2	N/A
Heavy omnibus	ME	M3	N/A
Light goods vehicle	NA1	N1**	1 July 1997*	Nil
Light goods vehicle	NA2	N1	N/A
Medium goods vehicle	NB	N2	N/A
Heavy goods vehicle	NC	N3	N/A
Very light trailer	TA	O1	N/A
Light trailer	TB	O2	N/A
Medium trailer	TC	O3	N/A
Heavy trailer	TD	O4	N/A

* see clause C.1.2

** up to 2.7 tonnes ‘GVM’ only

[2] Insert the following diagram after the text in Clause 29.5;

LONGITUDINAL CENTERLINE OF VEHICLE

LOADING DEVICE LOCATION AND APPLICATION TO THE DOOR

Figure 1