Vehicle Standard (Australian Design Rule 42/0442/04 – General Safety RequirementsGeneral Safety Requirements) 20052005

Amendment 11

I, JAMES ERIC LLOYD, Minister for Local Government, Territories and Roads, determine this vehicle standard under subsection 7 (1) of the Motor Vehicle Standards Act 1989.

Dated  5th OCTOBER  2007

[SIGNED]

James Eric Lloyd

Minister for Local Government, Territories and Roads

CONTENTS

1. LEGISLATIVE provisions

2. AMENDMENT of vehicle standard

SCHEDULE 1

1. LEGISLATIVE provisions

1.1 Name of Legislative Instrument

1.1.1 This Instrument is the Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 1.

1.2 Commencement

1.2.1 This Instrument commences on the day after it is registered.

2.                                          AMENDMENT of vehicle standard

2.1 The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.

SCHEDULE 1

[1] Clause 10.1, replace with the following:

“10.1 Enclosed LE vehicles must meet the following requirements:”

 [2] Insert a new clause

“14.5  Wheel Guards for MB, MC, MD1, MD2, MD3, NA and NB1 Category vehicles must comply with Clause 14.1 or Clause 14.2.”

[3]  Replace Figures 1 and 2 with;