Radiocommunications Devices (Compliance Labelling) Amendment Notice 2007 (No. )

Schedule 1 Amendments

(section 3)

[1] After subsection 17 (4)

insert

(4A) If:

(a) a standard specified as the standard for performance (the first‑mentioned standard) in an applicable standard permits test measurements to be taken in accordance with the requirements of a specified ETSI standard as an alternative to the requirements for test measurements in the first‑mentioned standard; and

(b) test measurements are taken in accordance with the requirements of the specified ETSI standard;

a device is to be assessed for conformity or non conformity with the requirements of the ETSI standard in accordance with the provisions governing the interpretation of measurement results within that standard, and subsections (2) and (3) do not apply.

[2] Subsection 17 (5), before the definition of test limit

insert

ETSI standard means a standard published by the European Telecommunications Standards Institute (ETSI).

[3] Schedule 3, item 3

substitute

Radiocommunications (Cordless Telephone) Standard 2008

[4] Schedules 4 and 5

substitute

Schedule 4 Application form

(section 11)

Application for permission to use compliance marks and for issue of supplier code number

Instructions for completion

Print clearly. Illegible, unclear or incomplete application forms may delay processing.
Suppliers must obtain permission to apply a compliance mark only once, before the first time they apply the label to an item.
This form may also be used to change supplier details.

Return your completed forms to:

PO Box Q500

Queen Victoria Building NSW 1230

Tel: 1300 850 115

Fax: (02) 6219 5275

Email: comply.label@acma.gov.au

Registration

( ) New registration

( ) Change of existing supplier details ‑ If you are changing your existing supplier details, please include your supplier code number:

Supplier details (manufacturer, importer or an authorised agent
Organisation name (OR PARTNERSHIP, TRADING TRUST OR INDIVIDUAL)		Postal address

		POSTCODE
		Street address where compliance records are to be kept (IF SAME AS POSTAL ADDRESS, WRITE ‘AS ABOVE’)
Organisation number (FOR EXAMPLE: ABN, ACN, OR ARBN)
		POSTCODE

Which regulatory arrangement(s) do you intend to supply under?		Contact details
( ) Telecommunications (A‑Tick) ( ) Radiocommunications (C‑Tick) ( ) EMC (C‑Tick) ( ) EMR (C‑Tick)		WORK ( )
		MOBILE
		FACSIMILE ( )
		EMAIL

Declaration
I declare that the contents of this application are true and correct. I understand that the compliance mark can only be used in accordance with the requirements specified in a Notice made under: Section 182 of the Radiocommunications Act 1992; or Section 407 of the Telecommunications Act 1997. I agree to inform ACMA of any change of circumstances relevant to the use of our supplier code number. I agree to inform ACMA of any changes to the applicant’s details above. For your information Under Division 136 of the Criminal Code Act 1995, it is an offence in Australia to make a statement that is false or misleading in a material particular in an application. Penalty: imprisonment for 12 months.


		SIGNATURE OF SUPPLIER/AGENT DATE

		PRINT NAME

		POSITION IN ORGANISATION

Schedule 5 Declaration of conformity

(subsection 4 (1), definition of declaration of conformity)

Supplier’s declaration of conformity

For compliance levels 1, 2 and 3 in Australia and levels of conformity 1, 2 and 3 in New Zealand

As required by notices under:

section 182 of the Australian Radiocommunications Act 1992;
section 407 of the Australian Telecommunications Act 1997; and
section 134 of the New Zealand Radiocommunications Act 1989.

Instructions for completion
This completed form remains with the supplier as part of the documentation required for the compliance records. Do not return this form to ACMA or RSM.
Supplier’s details
Name (name of manufacturer, importer or agent)		ACMA/MED supplier code number
SURNAME
GIVEN NAMES		OR
Address (address of manufacturer, importer or agent)		ACN, ARBN, ABN, NZCN or NZ GST number


POSTCODE

Product details

Product description – brand name, type, model, lot, batch or serial number (if available)

Applicable standards

Standard title, number and, if applicable, number of the test report

Declaration

I hereby declare that the product mentioned complies with the above mentioned standards and all products supplied under this declaration will be identical to the sample identified above.

SIGNATURE OF SUPPLIER OR AGENT

POSITION IN ORGANISATION

PRINT NAME

DATE

[5] Further amendments

Provision	omit	insert
subsection 4 (1), definition of authorised officer, paragraph (b)	the ACA	ACMA
subsection 4 (1), definition of supplier code number, paragraph (a)	the ACA	ACMA
paragraph 9 (4) (h)	the ACA	ACMA
paragraph 9 (8) (a)	the ACA	ACMA
paragraph 9 (8) (b)	the ACA	ACMA
paragraph 9 (8) (c)	the ACA	ACMA
subsection 11 (1)	the ACA	ACMA
subsection 11 (3)	the ACA (twice occurring)	ACMA
subsection 11 (4)	the ACA	ACMA
subsection 25 (4)	the ACA	ACMA
paragraph 25 (4) (a)	the ACA	ACMA
paragraph 25 (4) (b)	the ACA	ACMA
subsection 25 (5)	The ACA	ACMA
section 26	the ACA	ACMA
subsection 30 (4)	the ACA	ACMA
paragraph 30 (4) (a)	the ACA	ACMA
paragraph 30 (4) (b)	the ACA	ACMA
subsection 30 (5)	The ACA	ACMA