Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 2

I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

Dated 23   / 12    / 2010

Catherine King

Parliamentary Secretary for Infrastructure and Transport

CONTENTS

1. legislative provisions.............................................3

2. amendment of vehicle standard.....................................3

Schedule 1............................................................4

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 2.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.

Schedule 1

[1]               Clause 7.2.1 amend to read “Actuation of the 'Engine start control' shall not cause the vehicle to move”  

[2]               Clause 15 amend to read

“.....conform to SAA, SAE, BS, JIS, DIN, ISO or ECE Standards, or FMVSS 106 Brake Hoses, specified for ......”

[3]               Clause 19.3.2.1.1.5 amend to read “Remote opening/closing is allowable through continuous operation of a remote actuation device provided that the remote actuation device must be incapable of opening/closing  the power window from a distance of more than 11 m from the vehicle”

[4]               Clause 19.3.2.6.4 amend to read “…..equivalent to the technical requirements of clause 19.3…..”