Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1

I, CATHERINE KING, Parliamentary Secretary for Infrastructure and Transport, determine this vehicle standard under subsection 7 of the Motor Vehicle Standards Act 1989.

Dated  20 / 5 /2012  

[Signed]

Catherine King

Parliamentary Secretary for Infrastructure and Transport

CONTENTS

1. legislative provisions

2. amendment of vehicle standard

Schedule 1

1. legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule – Harmonisation) 2012 Amendment 1.
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule – Harmonisation) 2012.
      

Schedule 1

[1]               Clause 5.1 (c) amend to read:

“the approval corresponds to:

(i)            where Australia applies the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard or the UNECE Regulation in force from time to time; or

(ii)         where Australia does not apply the UNECE Regulation, the same version of the UNECE Regulation as specified in the alternative standard.”