Airports Legislation Amendment Regulation 2012 (No. 1)1
Select Legislative Instrument 2012 No. 188
I, QUENTIN BRYCE, Governor-General of the Commonwealth of Australia, acting with the advice of the Federal Executive Council, make the following regulation under the Airports Act 1996.
Dated 2 August 2012
QUENTIN BRYCE
Governor-General
By Her Excellency’s Command
ANTHONY ALBANESE
This regulation is the Airports Legislation Amendment Regulation 2012 (No. 1).
This regulation commences on the day after it is registered.
(1) Part 1 of Schedule 1 amends the Airports Regulations 1997.
(2) Part 2 of Schedule 1 amends the Airports (Building Control) Regulations 1996.
(3) Part 3 of Schedule 1 amends the Airports (Environment Protection) Regulations 1997.
(section 3)
Part 1 Amendments of Airports Regulations 1997
[1] Subregulation 8.02 (1)
omit
records
insert
written records
[2] Subregulation 8.02 (2), note 2
substitute
Note 2 Under transitional provisions, this subregulation continues to apply to records relating to a financial year that started before 1 July 2008 (see regulation 4 of the Airports Amendment Regulations 2009 (No. 2)).
Note 3 A record may, in certain circumstances, be kept electronically (see section 12 of the Electronic Transactions Act 1999).
[3] Subregulations 8.03 (1) and (2)
substitute
(1) A person who is obliged to keep a record for an airport under regulation 8.02 must give a copy of the record in writing for a financial year to the ACCC within one month after the end of the financial year.
Note A record may, in certain circumstances, be given electronically (see section 9 of the Electronic Transactions Act 1999).
(2) If an airport-operator company carries out a survey about a quality of service matter, the company must give the ACCC a document in writing setting out the results within one month after the end of the financial year in which the survey is carried out.
Note A document may, in certain circumstances, be given electronically (see section 9 of the Electronic Transactions Act 1999).
Part 2 Amendment of Airports (Building Control) Regulations 1996
[4] Subregulation 1.04 (1), definition of Australian Standard
omit
Part 3 Amendments of Airports (Environment Protection) Regulations 1997
[5] Subregulation 1.05 (1), definition of AS
omit
[6] Subregulation 1.05 (1), definition of Australian Standard
substitute
Australian Standard means a standard published by Standards Australia as an Australian Standard.
[7] Subregulation 1.05 (1), definition of document, note
substitute
Note For the meaning of document, see section 2B of the Acts Interpretation Act 1901.
[8] Regulation 1.06
substitute
1.06 References to Australian Standards
An Australian Standard referred to in these regulations is the standard as in force or existing from time to time.
Note Section 2L of the Acts Interpretation Act 1901 provides that a reference consisting of the words ‘Australian Standard’ followed by the letters ‘AS’ and a number is a reference to the standard so numbered
that is published by, or on behalf of, Standards Australia Limited (ACN 087 326 690).
[9] Further amendments
Provision | omit each mention of | insert |
Schedule 1, subitem 1.01 (1), definition of ICP standard method | AS 2800 | Australian Standard AS 2800 |
Schedule 1, item 1.02, table 1, item 1 | AS 3543 | British Standard BS 2742C |
Schedule 1, item 1.02, table 1, item 2 | BS893 or AS 4323.2-1995 | British Standard BS 893 or |
Schedule 1, item 1.02, table 1, item 5 | AS 3580.3.1 | Australian Standard AS 3580.3.1 |
Schedule 1, item 1.02, table 1, item 6 | AS 358 0.5.1 | Australian Standard AS 3580.5.1 |
Schedule 1, item 1.02, table 1, item 9 | AS 3580.13.1 and AS 3580.13.2 | Australian Standard AS 3580.13.1 and AS 3580.13.2 |
Schedule 1, item 1.02, table 1, item 11 | AS3580.7.1—1992 | Australian Standard AS 3580.7.1-2011 |
Schedule 1, item 1.02, table 1, item 12 | AS 3580.8.1 | Australian Standard AS 3580.8.1 |
Schedule 1, item 1.02, table 1, item 16 | NIOSH method 6007 | National Institute for Occupational Safety and Health (NIOSH) method 6007 |
Schedule 1, item 1.02, table 1, item 17 | AS4323: 1995, Part 1 | Australian Standard AS 4323.1-1995 |
Schedule 4, item 1.02, definitions of average maximum A-weighted sound pressure level, A-weighted sound pressure level and equivalent continuous A-weighted sound pressure level | AS 1055 | Australian Standard AS 1055 |
Schedule 4, item 1.02, definition of time weighting ‘F’ | AS 1259 | Australian Standard AS 1259 |
Schedule 4, subitem 4.01 (3) | AS 1055 | Australian Standard AS 1055 |
Schedule 4, subitem 4.01 (4) | AS 2702 | Australian Standard AS 2702 |
Schedule 4, subitem 4.01 (5) | AS 2377 | Australian Standard AS 2377 |
Schedule 4, subitems 4.01 (6) and (7) | AS 1055 | Australian Standard AS 1055 |
Note
1. All legislative instruments and compilations are registered on the Federal Register of Legislative Instruments kept under the Legislative Instruments Act 2003. See www.comlaw.gov.au.