Item

Description

CAS No.

1.

Acetylene

74-86-2

2.

Acetone

67-64-1

3.

Aluminium chloride

7446-70-0

4.

Antimony

7440-36-0

5.

Arsenic

7440-38-2

6.

Arsenic trioxide

1327-53-3

7.

Bis(2-chloroethyl)ethylamine hydrochloride

3590-07-6

8.

Bis(2-chloroethyl)methylamine hydrochloride

55-86-7

9.

Benzil

134-81-6

10.

Benzaldehyde

100-52-7

11.

Benzoin

119-53-9

12.

2-bromochloroethane

107-04-0

13.

Butyrylcholinestrerase (BCHE)

14.

Chlorine

7782-50-5

15.

Dichloromethane

75-09-2

16.

Diethyl ether

60-29-7

17.

Dimethyl ether

115-10-6

18.

Dimethylaminoethanol

108-01-0

19.

N,N-Dimethylaniline

121-69-7

20.

Dicyclohexylamine (DCA)

101-83-7

21.

Diethylenetriamine

111-40-0

22.

Ethylene

74-85-1

23.

Ethylene dichloride

107-06-2

24.

2-methoxyethanol

109-86-4

25.

Ethyl bromide

74-96-4

26.

Ethyl chloride

75-00-3

27.

Ethylamine

75-04-7

28.

Ethylene oxide

75-21-8

29.

Fluorapatite

1306-05-4

30.

Hexamine

100-97-0

31.

Hydrogen sulphide

7783-06-4

32.

Isocyanatomethane

624-83-9

33.

Isopropanol, 95% concentration or greater

67-63-0

34.

Isopropyl bromide

75-26-3

35.

Isopropyl ether

108-20-3

36.

Mandelic acid

90-64-2

37.

Methylamine

74-89-5

38.

Methyl bromide

74-83-9

39.

Methyl chloride

74-87-3

40.

Methyl iodide

74-88-4

41.

Methylmercaptane

74-93-1

42.

Monoethylene Glycol (MEG)

107-21-1

43.

Monoisopropylamine

75-31-0

44.

Nitromethane

75-52-5

45.

Obidoxime chloride

114-90-9

46.

Oxalyl chloride

79-37-8

47.

Picric acid

88-89-1

48.

Potassium bromide

7758-02-3

49.

Potassium sulphide

1312-73-8

50.

Potassium thiocyanate

333-20-0

51.

Pyridine

110-86-1

52.

Pyridostigimine bromide

101-26-8

53.

Quinaldine

91-63-4

54.

Sodium bromide

7647-15-6

55.

Sodium metal

7440-23-5

56.

Thiophosphoryl chloride

3982-91-0

57.

Tributylamine

102-82-9

58.

Tributylphosphite

102-85-2

59.

Triethylamine

121-44-8

60.

Triisobutylphosphite

1606-96-8

61.

Trimethlyamine

75-50-3

62.

Tris(2-chloroethyl)amine hydrochloride

817-09-4

63.

Sodium hypochlorite

7681-52-9

64.

Sulfur trioxide

7446-11-9

65.

White/yellow phosphorus

12185-10-3, 7723-14-0

Item

Description

1.

Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2.5 meters.

2.

Full face-mask air-purifying and air-supplying respirators.

3.

Class II biosafety cabinets and glove boxes.

4.

Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials.

5.

Fermenters with an internal volume of 10 L – 20 L, usable with biological materials.

6.

Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.

7.

Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0.1 m³ (100 l) and less than 20 m³ (20000 l).

8.

Agitators for use in reaction vessels or reactors specified in item 7.

9.

Impellers, blades or shafts designed for agitators specified in item 8.

10.

Heat exchangers or condensers with a heat transfer surface area of greater than 0.15 m², and less than 20 m².

11.

Tubes, plates, coils or blocks (cores) designed for heat exchangers or condensers specified in item 10.

12.

Multiple-seal, single seal and seal-less pumps with manufacturer's specified maximum flow-rate greater than 0.6 m3/h.

13.

Valves with nominal sizes greater than 1.0 cm

14.

Casings (valve bodies) or preformed casing liners designed for valves specified in item 13.

Technical note: The 'nominal size' is defined as the smaller of the inlet and outlet port diameters.

15.

Storage tanks, containers or receivers with a total internal (geometric) volume greater than 0.1 m³ (100 l).

16.

Distillation or absorption columns of internal diameter greater than 0.1 m.

17.

Liquid distributors, vapour distributors or liquid collectors designed for distillation or absorption columns specified in item 16.

18.

Vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m³/h (under standard temperature (273 K (0o C)) and pressure (101.3 kPa) conditions), in which all surfaces that come into direct contact with the chemical(s) being processed are made from any of the following materials:

 (a) nickel or alloys with more than 40% nickel by weight;

 (b) alloys with more than 25% nickel and 20% chromium by weight;

 (c) fluoropolymers (polymeric or elastomeric materials with more than 35% fluorine by weight);

 (d) glass or glass-lined (including vitrified or enamelled coating);

 (e) graphite or carbon-graphite;

 (f) tantalum or tantalum alloys;

 (g) titanium or titanium alloys;

 (h) zirconium or zirconium alloys;

 (i) ceramics;

 (j) ferrosilicon (high silicon iron alloys); or

 (k) niobium (columbium) or niobium alloys.

Technical note: carbon-graphite is a composition consisting of amorphous carbon and graphite, in which the graphite content is eight percent or more by weight.

19.

Casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for vacuum pumps specified in item 18.

20.

Laboratory equipment, including parts and accessories for such equipment, for the analysis or detection, destructive or non-destructive, of chemical substances.