Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006 Amendment 1

I, PAUL FLETCHER, Minister for Territories, Local Government and Major Projects, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated  11 November 2015

[Signed]

Paul Fletcher

Minister for Territories, Local Government and Major Projects

CONTENTS

1. Legislative provisions

2. Amendment of vehicle standard

SCHEDULE 1

1. Legislative provisions
   1.                                  Name of Legislative Instrument
      1.                            This instrument is the Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006 Amendment 1
   2.                                  Commencement
      1.                            This instrument commences on the day after it is registered.
2. Amendment of vehicle standard
   1.                                  The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 57/00 –Special Requirements for L-Group Vehicles) 2006.

SCHEDULE 1

[1]               Clause 57.2.2.1  amend to read:

“Handlebars must not extend:

(a)   less than 250mm on each side of the centreline of the vehicle for all L Group vehicles;

(b)   more than 450mm on each side of the centreline of the vehicle for LA, LB and LE category vehicles; or

(c)   more than 550mm on each side of the centreline of the vehicle for all LC and LD category vehicles.”