Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005 Amendment 6

I, PAUL FLETCHER, Minister for Territories, Local Government and Major Projects, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated  2 February 2016

[SIGNED]

Paul Fletcher

Minister for Territories, Local Government and Major Projects

CONTENTS

1.  Legislative provisions

2.  Amendment of vehicle standard

Schedule 1

1.                                          Legislative provisions

1.1.                                    Name of Legislative Instrument

1.1.1.                              This instrument is the Vehicle Standard Australian Design Rule 42/04 –General Safety Requirements 2005 Amendment 6

1.2.                                    Commencement

1.2.1.                              This instrument commences on the day after it is registered.

2.                                          Amendment of vehicle standard

2.1.                                    The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 42/04 – General Safety Requirements) 2005.

Schedule 1

[1]               Clause 8.1.2 amended to read:

“the bumper contact surface is located not more than 600 mm forward of the rear of the vehicle;”