Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1

I, PAUL FLETCHER, Minister for Urban Infrastructure, determine this vehicle standard under section 7 of the Motor Vehicle Standards Act 1989.

Dated 21 November 2017

[SIGNED]

Paul Fletcher

Minister for Urban Infrastructure

CONTENTS

1. legislative provisions

2. amendment of vehicle standard

Schedule 1

1.                                           legislative provisions
   1.                                     Name of Legislative Instrument
      1.                               This instrument is the Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007 Amendment 1.
   2.                                     Commencement
      1.                               This instrument commences on the day after it is registered.
2.                                           amendment of vehicle standard
   1.                                     The changes specified in Schedule 1 amend Vehicle Standard (Australian Design Rule 33/00 – Brake Systems for Motorcycles and Mopeds) 2007.

Schedule 1

1.                Clause 3 omit “clause 3.2”, substitute “clause 3.3”.
2.                Clause 3.2 renumber as 3.3.
3.                Insert a new clause 3.2 to read

“Vehicles certified to ADR 33/01 or a later version need not comply with this rule.”

1.                Clause 5.1 omit “clause 3.2”, substitute “clause 3.3”.