Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018 Amendment 1

I, KEVIN HOGAN, Assistant Minister to the Deputy Prime Minister, determine this national road vehicle standard under section 12 of the Road Vehicle Standards Act 2018.

Dated  24 February 2022

[SIGNED]

Kevin Hogan

Assistant Minister to the Deputy Prime Minister

CONTENTS

1. legislative provisions.............................................3

2. amendment of vehicle standard.....................................3

Schedule 1............................................................4

1. legislative provisions
   1.                                     Name of Legislative Instrument
      1.                               This instrument is the Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018 Amendment 1.
   2.                                     Commencement
      1.                               This instrument commences on the day after it is registered.
2. amendment of vehicle standard
   1.                                     The changes specified in Schedule 1 amend the Vehicle Standard (Australian Design Rule 35/06 – Commercial Vehicle Brake Systems) 2018.

Schedule 1

[1]               Clause 3.1, omit “3.10”, substitute “3.11”.

[2]               Clause 3.10, renumber as clause 3.11.

[3]               Insert a new clause 3.10 to read:

“3.10. Vehicles certified to comply with the Australian Design Rule 35/07 – Commercial Vehicle Brake Systems, or a later version, are not required to comply with this rule.”